Articles
Articles
-
Optimization of CHARPY Method Carburizing Treatment on the Hardness of Low Carbon Steel
- Information
- Views: 52 hit(s) Pub. Date: 29 October 2024
AUTHOR(S):Dwi Purwanto, Gema Ramadhona, Sulfah Anjarwati, Trio Nurwibowo -
Renewable Source Powered Thermo Electric Peltier Device for the Generation of Potable Water From the Atmosphere Suitable for the Climatic Conditions of Jabalpur
- Information
- Views: 61 hit(s) Pub. Date: 23 October 2024
AUTHOR(S):Mandavi Yadav, Prakash Chandra Agrawal -
Analysis Of Charpy Method Impact Testing Using ST60 Steel Specimens
- Information
- Views: 47 hit(s) Pub. Date: 23 October 2024
AUTHOR(S):Dwi Purwanto -
The CAD Modeling for Contact Ratio
- Information
- Views: 850 hit(s) Pub. Date: 26 April 2024
AUTHOR(S):Daniela Ghelase, Luiza Daschievici -
Railway System ‘Vehicle-Track’: Relation Between the Spectral Density of Excitation vs of Response
- Information
- Views: 392 hit(s) Pub. Date: 26 March 2024
AUTHOR(S): Konstantinos Sp. Giannakos -
A Fuel Oil Production Plant Through Pyrolysis of the Waste High-Density Polyethylene
- Information
- Views: 721 hit(s) Pub. Date: 31 December 2023
AUTHOR(S): Ilirjan Malollari, Redi Buzo, Alma Peposhi -
The Effect of Using Lauric Acid on Cooler Boxes and Peltier as a Media Cooler Box
- Information
- Views: 555 hit(s) Pub. Date: 13 November 2023
AUTHOR(S):Ahmad Fauzi, Dody Irawan, Fuazen, Raudhatul Fadhilah -
Effect of Cooling Using Added Peltier Ice Pack on Cool Box
- Information
- Views: 663 hit(s) Pub. Date: 13 November 2023
AUTHOR(S): Atma Redho, Doddy Irawan, Eko Julianto, Raudhatul Fadhilah -
The Dynamics of Cavitation Bubble Collapse Impacting Fine Particles Near Spherical Wall
- Information
- Views: 580 hit(s) Pub. Date: 19 September 2023
AUTHOR(S):Jamal-Deen Kukurah, Anthony Akayeti, Joseph Sekyi-Ansah, James Kwasi Quaisie, Abdul-Hamid Mohammed, Philip Yamba, Bismark Addai -
Redesign and Simulation of a Hammer Mill to Minimize Consume of Iron Filings
- Information
- Views: 810 hit(s) Pub. Date: 21 July 2023
AUTHOR(S):Abdul-Hamid Mohammed, Kwabena Offeh Gyimah, Philip Yamba, Jamal-Deen Kukurah, Joseph Sekyi-Ansah, Anthony Akayeti, James Kwasi Quaisie,... -
A Survey On Heat Pipe Heat Recovery Systems
- Information
- Views: 598 hit(s) Pub. Date: 04 July 2023
AUTHOR(S):Babli Lodhi, Dr. Shrihar Pandey -
Effect of Producing Natural Water by Dehumidification of Atmospheric Air Using Conventionally Designed Atmospheric Water Generator (AWG) in a Humidified Area of Sultanate of Oman
- Information
- Views: 529 hit(s) Pub. Date: 03 July 2023
AUTHOR(S):Majid Sulaiyam Ghaneem Al Duwaiki, Mohammed Khamis Salim Alhashemi, S. Janakiraman -
Hardness and Metallographic Characteristics Analysis of AISI 1040 Steel Utilizing Heat Treatment Processes
- Information
- Views: 755 hit(s) Pub. Date: 09 June 2023
AUTHOR(S):Dwi Purwanto -
A Review on Enhancement of Developing Noise-less Suction Muffler for Reciprocating Compressor
- Information
- Views: 699 hit(s) Pub. Date: 01 June 2023
AUTHOR(S):K. Santosh Kumar, K. Kishore, P. Usha Sri -
Effects Of Various Temperatures On Impact Strength, Hardness And Metallography In ST 37 Steel For Plates By Heat Treatment And Quenching Processes
- Information
- Views: 824 hit(s) Pub. Date: 22 March 2023
AUTHOR(S):Dwi Purwanto -
Base on Solid-works Design of Compact High Efficient Solar Water Heater
- Information
- Views: 836 hit(s) Pub. Date: 14 March 2023
AUTHOR(S):Ramcy Saah Stubblefield -
Experimental Study and Analysis of the Effect of Phase Change Material (PCM) Mass Variation on Solar Still Desalination Equipment
- Information
- Views: 904 hit(s) Pub. Date: 24 January 2023
AUTHOR(S): Haidir Ali, Doddy Irawan, Fuazen, Raudhatul Fadhilah -
Effect of Using Phase Change Material (PCM) Paraffin Wax and Lauric Acid as Heat Storage on Water Productivity in Solar Desalination
- Information
- Views: 742 hit(s) Pub. Date: 24 January 2023
AUTHOR(S):Vinsensius Hendrik, Raudhatul Fadhilah, Doddy Irawan, Eko Sarwono -
Design of a Seawater Desalination Device for Laboratory Scale Solar Still Systems with the Addition of PCM (Phase Change Material) as a Heat Storage Material
- Information
- Views: 691 hit(s) Pub. Date: 29 December 2022
AUTHOR(S): Noor Iskandar, Doddy Irawan, Eko Julianto, Raudhatul Fadhilah -
The Effect of Rija-rija Lignocellulose Addition on Compressive Strength and Absorbility of Composite Bricks
- Information
- Views: 702 hit(s) Pub. Date: 29 December 2022
AUTHOR(S): Rio Hartanto, Doddy Irawan, Eko Julianto, Raudhatul Fadhilah -
Effect of Cavitation Water Jet Peening on 8090Al-li Fatigue Life N/cycle
- Information
- Views: 674 hit(s) Pub. Date: 28 December 2022
AUTHOR(S): Joseph Sekyi-Ansah, James Kwasi Quaisie, Stephen Eduku, Philip Baidoo, Philip Yamba, Felix Uba, Enock A. Doudu, Emmanuel Amankwah -
Analysis of Predictive Maintenance in Industry 4.0: A review
- Information
- Views: 939 hit(s) Pub. Date: 02 December 2022
AUTHOR(S): Udai Chandra Jha, R. Jitendra Sai, M. V. B. Krishna Reddy, Abhishek Singh -
Generic Model for Management of Safety of Technical Installations with Small Modular Reactors
- Information
- Views: 837 hit(s) Pub. Date: 02 December 2022
AUTHOR(S):Dana Prochazkova -
New Exact Solutions of Wave and Heat Equations via Andualem and Khan Transform
- Information
- Views: 962 hit(s) Pub. Date: 10 November 2022
AUTHOR(S):Mulugeta Andualem, Ilyas Khan, Atinafu Asfaw -
Comparison of International and European Standards Regarding Energy Management in Industry
- Information
- Views: 742 hit(s) Pub. Date: 07 October 2022
AUTHOR(S):Carina Beermann, Petr Mastny -
Wireless Vehicle Deceleration Speed System (WVDSS)
- Information
- Views: 820 hit(s) Pub. Date: 26 September 2022
AUTHOR(S): Suleiman Q. Abu-Ein -
Analysis and Modeling of a Flexible Manufacturing System based on Petri Nets
- Information
- Views: 856 hit(s) Pub. Date: 09 September 2022
AUTHOR(S):Mohamed Najeh Lakhoua, Jihen El Khaldi, Youssef El Fekih -
The Influence of Dynamics and Vibrational Characteristics on Weldability of Joining Metals Ultrasonically
- Information
- Views: 930 hit(s) Pub. Date: 22 June 2022
AUTHOR(S):Ziad. Sh. Al Sarraf -
About Competitive and Adaptive Control in Manufacturing Process
- Information
- Views: 1167 hit(s) Pub. Date: 05 May 2022
AUTHOR(S):Daschievici Luiza, Ghelase Daniela -
Mathematical Modelling and Computer Simulation of the Flow Around a Formula 1 Racing Car
- Information
- Views: 1394 hit(s) Pub. Date: 04 April 2022
AUTHOR(S):T. A. Chrysoloras, N. C. Markatos -
Modeling of the Competitive Management Efficiency
- Information
- Views: 821 hit(s) Pub. Date: 23 March 2022
AUTHOR(S):Daniela Ghelase, Luiza Daschievici -
Effect of Packing Profile on Optimisation of Plastic Injection Moulding Process
- Information
- Views: 1085 hit(s) Pub. Date: 22 February 2022
AUTHOR(S):Osayoghoghome Peter Aigbogun, Jacob Olaitan Akindapo -
Comparison Between the Evolution of the Wear Rate and the Temperature in the Cutting Area
- Information
- Views: 958 hit(s) Pub. Date: 11 February 2022
AUTHOR(S):Daschievici Luiza, Ghelase Daniela -
Comparison of International and European Standards in the Field of Energy Management
- Information
- Views: 988 hit(s) Pub. Date: 27 January 2022
AUTHOR(S):Carina Beermann -
Comparison Stand Tests and Road tests of brake systems under Various Conditions
- Information
- Views: 940 hit(s) Pub. Date: 31 December 2021
AUTHOR(S):Waleed Momani, Sayel M. Fayyad -
Analysis of the Influencing Factors in the Production of Parts with Nonconformities
- Information
- Views: 976 hit(s) Pub. Date: 08 December 2021
AUTHOR(S):Flavia Fechete -
Mathematical Model for Heat Collector
- Information
- Views: 1093 hit(s) Pub. Date: 25 November 2021
AUTHOR(S):Krešimir Orozović, Branko Balon -
Increasing the Efficacity of an Anti-hail Rocket
- Information
- Views: 1035 hit(s) Pub. Date: 08 October 2021
AUTHOR(S):Cristina Mihailescu, Marius Radulescu -
Processing of Biogas Industrial Waste – Application in a Manufacturing Unit
- Information
- Views: 1025 hit(s) Pub. Date: 28 July 2021
AUTHOR(S):G. Pouliou, A. Vasileiadou, Z. Ziaka, S. Vasileiadis -
Tribological Aspects of the Dynamic and Thermal Phenomena Modelling in the Cutting Process
- Information
- Views: 974 hit(s) Pub. Date: 27 July 2021
AUTHOR(S):Daschievici Luiza, Ghelase Daniela -
Thermodynamic Process of an Ideal Heat Transfer Process in a System with a Solar Collector as a Higher Temperature Tank
- Information
- Views: 1318 hit(s) Pub. Date: 27 July 2021
AUTHOR(S):Krešimir Orozović, Branko Balon -
On Forced Vibrations Caused by Earthquakes
- Information
- Views: 1125 hit(s) Pub. Date: 27 July 2021
AUTHOR(S):Anton Bogachov, Felix Sadyrbaev -
Estimate Flutter Speed Half Wing Model of N219 using MSC NASTRAN
- Information
- Views: 971 hit(s) Pub. Date: 11 May 2021
AUTHOR(S):Mirna Sari, Muchamad Bayu Sakti Pratama, Harus L.G -
An approach to the Influence of Fluid Viscosity and the Cutting Parameters in Turning a Carbon Steel Using Surface Methodology
- Information
- Views: 1044 hit(s) Pub. Date: 02 April 2021
AUTHOR(S):Kamel Bousnina, Ali Falleh -
Optimization and Prediction of Dilution Percentage in Submerged Arc Welding Process
- Information
- Views: 1213 hit(s) Pub. Date: 01 April 2021
AUTHOR(S):S. Praveen, S. Praveen Kumar -
Iiot and Industry 4.0
- Information
- Views: 1010 hit(s) Pub. Date: 01 March 2021
AUTHOR(S): Urmila A. Patil, Rajashree D. Patil -
Results of the Analysis of the Effects of Low-sulphur Fuel Oil on the Operation of the Marine Two-stroke Slow-speed Diesel Engine
- Information
- Views: 1021 hit(s) Pub. Date: 23 February 2021
AUTHOR(S):Ratko Bozic -
Behavioral Relationship of the Market qnd Manufacturing System
- Information
- Views: 1170 hit(s) Pub. Date: 28 December 2020
AUTHOR(S): Ghelase Daniela, Daschievici Luiza -
Reiforcement learning in Cognitive Engineering of Manufacturing processes
- Information
- Views: 1054 hit(s) Pub. Date: 28 December 2020
AUTHOR(S): Daschievici Luiza, Ghelase Daniela -
Development of Polymer-matrix Composite Material Using Banana Stem Fibre and Bagasse Particles for Production of Automobile Brake Pad
- Information
- Views: 1292 hit(s) Pub. Date: 24 December 2020
AUTHOR(S): Akindapo Jacob Olaitan, Agbo Joseph Chidome -
Performance Test of Multi Micro-Channel Evaporators for Cooling a High Heat Fluxelectronic Devices
- Information
- Views: 1009 hit(s) Pub. Date: 24 December 2020
AUTHOR(S): Mohamed Karim, A.M.K El-Ghonemy, Eldesouki I. Eid -
Study on the Polyhedral Triangular Tessellation of the Sphere
- Information
- Views: 1175 hit(s) Pub. Date: 24 December 2020
AUTHOR(S): Fechete Flavia -
Ceramic Coatings via Friction Stir Processing: Challenges and Drawbacks for Industrial Applications
- Information
- Views: 1081 hit(s) Pub. Date: 24 December 2020
AUTHOR(S): Milena Folea, Mircea Anton Vasiloni -
Performance Evaluation and Off Design Analysis of ihe HPAnd LP Feed Water Heaters on a 3x135 MW Coal Fired Power Plant
- Information
- Views: 1150 hit(s) Pub. Date: 27 November 2020
AUTHOR(S):Jameson R. Almedilla, Leonel L. Pabilona, Eliseo P. Villanueva -
Performance Optimization of Centrifugal Fan with Ducts through CFD Simulation of Impeller Design
- Information
- Views: 1347 hit(s) Pub. Date: 25 November 2020
AUTHOR(S): L. Umamaheswararao, V. Chandrasimha -
A Comparative Study for Different Shapes of Airfoils
- Information
- Views: 1597 hit(s) Pub. Date: 22 December 2019
AUTHOR(S): Mohamed Adel -
Using of Simple Scheduling Rules in Decision Process
- Information
- Views: 1622 hit(s) Pub. Date: 30 August 2019
AUTHOR(S):Ioan Ghimbaseanu -
Optimization Problem of Local Constraints for Coherent Topology Behavior
- Information
- Views: 1375 hit(s) Pub. Date: 30 August 2019
AUTHOR(S):Ioan Enescu -
Heat Distribution on Thin Plates with Point Sources
- Information
- Views: 1639 hit(s) Pub. Date: 23 August 2019
AUTHOR(S):Imam Solekhudin -
Finishing and Strengthening of Internal Cylindrical Surfaces by Vibratory-Rolling
- Information
- Views: 1427 hit(s) Pub. Date: 23 August 2019
AUTHOR(S):Badea Lepadatescu -
Flyback Converter of Electrical Discharge Machining Power Supply: Application to Surface Texturing
- Information
- Views: 1583 hit(s) Pub. Date: 11 April 2019
AUTHOR(S):Nazriah Mahmud, Azli Yahya, Eko Supriyanto -
A Visualization of Flow Patterns During Adiabatic Two-Phase Flow of Air-Water Mixtures in Microchannel
- Information
- Views: 1594 hit(s) Pub. Date: 22 January 2019
AUTHOR(S):Napaphat Prathansong -
Experimental Evaluation of the Performance of Heat Pipes with Nanoparticle Layer
- Information
- Views: 1677 hit(s) Pub. Date: 18 December 2018
AUTHOR(S):Tomio Okawa, Menglei Wang, Koji Enoki -
Study of Axial Force and Torque at Drilling on ZTAL4Cu1 Alloy
- Information
- Views: 1638 hit(s) Pub. Date: 03 December 2018
AUTHOR(S):Badea Lepadatescu -
Study Regarding the Accuracy of Measurement by Factors as Repeatability and Reproducibility
- Information
- Views: 1656 hit(s) Pub. Date: 22 November 2018
AUTHOR(S):Ioan Ghimbaseanu -
3D CFD Model of Thermogasdynamic State of the New Safe Confinement of Chernobyl NPP
- Information
- Views: 1876 hit(s) Pub. Date: 25 October 2018
AUTHOR(S):Pavlo Krukovskyi, Vladyslav Oliinyk, Mikhail Metel -
Increasing of Carbon Steel Performances by Superficial Heat Treatments in Plasma
- Information
- Views: 1937 hit(s) Pub. Date: 24 September 2018
AUTHOR(S): Bolfa Traian Eugen -
Studies Regarding Finishing and Work Hardening the Internal Surfaces by Radial Vibratory Rolling Method
- Information
- Views: 1863 hit(s) Pub. Date: 24 September 2018
AUTHOR(S): Badea Lepadatescu, Anisor Nedelcu -
Experimental Characterization of the Heat Transfer in a Latent Direct Contact Thermal Energy Storage with One Nozzle in Labor Scale
- Information
- Views: 2743 hit(s) Pub. Date: 25 August 2018
AUTHOR(S): Stefan Krimmel, Anastasia Stamatiou, Jörg Worlitschek, Heimo Walter -
One Dimensional Mathematical Model for a Thermocline Energy Storage Device
- Information
- Views: 1997 hit(s) Pub. Date: 25 August 2018
AUTHOR(S): Heimo Walter, Natalie Strohmayer, Michael Hameter -
Biosensor Based on Total Internal Reflection Imaging Ellipsometry
- Information
- Views: 1954 hit(s) Pub. Date: 11 July 2018
AUTHOR(S): Yu Niu, Gang Jin -
The guidelines in determining the precision and amount of variation of gauging systems used in the manufacturing process
- Information
- Views: 1752 hit(s) Pub. Date: 31 May 2018
AUTHOR(S): Simona Duicu -
Studies regarding the ways of estimation the reliability of cutting tools and handling stress constraints
- Information
- Views: 1671 hit(s) Pub. Date: 31 May 2018
AUTHOR(S): Ioan Ghimbasanu -
Proper Arrangement of Reinforcing Ribs for Elimination of Thermal Deformations in Metallurgical Products
- Information
- Views: 2116 hit(s) Pub. Date: 20 April 2018
AUTHOR(S): Matarneh M.E., Al Quran F.M., Chigarev V. V., Ioza A. V -
Examination of Shape Error of Outer Cylindrical Surfaces Machined by Environmentally Friendly Way
- Information
- Views: 1916 hit(s) Pub. Date: 19 April 2018
AUTHOR(S): Gyula Varga, Tibor Puskás, István Debreceni -
Decision-making in procedure selection on the basis of efficiency in machining hardened surfaces
- Information
- Views: 2068 hit(s) Pub. Date: 18 April 2018
AUTHOR(S): Janos Kundrak, Viktor Molnar, Istvan Deszpoth -
Theoretical and Experimental Analysis of the Effect of Chip Size Ratio on Cutting Forces in Face Milling of Steel
- Information
- Views: 2490 hit(s) Pub. Date: 18 April 2018
AUTHOR(S): János Kundrák, Angelos P. Markopoulos, Tamás Makkai, Antal Nagy -
Modeling of Unsteady Two-Phase Flow over a Stretching Sheet with Analysis of Heat and Mass Transfer due to Electrification of Particles and Viscous Dissipation
- Information
- Views: 2139 hit(s) Pub. Date: 16 April 2018
AUTHOR(S): Aswin Kumar Rauta, Saroj Kumar Mishra -
Buoyancy-driven Thermal and Flow Characteristics in Gaps between Two Glasses of Multi-framed Window
- Information
- Views: 1852 hit(s) Pub. Date: 11 April 2018
AUTHOR(S): Juhee Lee, Younjun Lee -
Approximate Solution for Magnetohydrodynamics Fluid Flow between Two Circular Discs
- Information
- Views: 2023 hit(s) Pub. Date: 11 April 2018
AUTHOR(S): Fatma Ayaz, Hayriye Yetim, Nilay Akgonullu Pirim -
Mechanical Properties of CFRP/EVA Composites According to Lamination Ratio
- Information
- Views: 2198 hit(s) Pub. Date: 27 December 2017
AUTHOR(S): Sun-Ho Go, Seong-Min Yun, Hee-Jae Shin, Jang-Ho Lee, Lee-Ku Kwac, Hong-Gun Kim -
Ensemble Selection in Expensive Optimization Problems
- Information
- Views: 2105 hit(s) Pub. Date: 27 December 2017
AUTHOR(S): Yoel Tenne -
Reconstructed gasification technology
- Information
- Views: 2140 hit(s) Pub. Date: 20 November 2017
AUTHOR(S): Pavel Friedel, Jakub Čespiva -
An Improved Method for Forming Large Diameter Pipes with an Enlarged Wall Based on the UOE Process
- Information
- Views: 1865 hit(s) Pub. Date: 17 November 2017
AUTHOR(S): Yu. B. Chechulin, A. Kichka -
Boundary layer and mesh refinement effects on aerodynamic performances of horizontal axis wind turbine (HAWT)
- Information
- Views: 2432 hit(s) Pub. Date: 17 November 2017
AUTHOR(S): Younes El Khchine, Mohammed Sriti -
Heat Transfer and Pressure Drop Characteristics in a packed bed Solar Air Heater
- Information
- Views: 2139 hit(s) Pub. Date: 17 November 2017
AUTHOR(S): L. Varshney, Rameshwar Kumar Singh -
Reliability prediction of tensile strength of a glass fiber reinforced polyamide using response surface method
- Information
- Views: 1922 hit(s) Pub. Date: 17 November 2017
AUTHOR(S): Mohamed Makki Mhalla, Ahmed Bahloul, Chokri Bouraoui -
Modeling and Simulation of the Competitiveness of Manufacturing Systems
- Information
- Views: 2019 hit(s) Pub. Date: 27 October 2017
AUTHOR(S): Ghelase Daniela, Daschievici Luiza, Ioana Diaconescu -
Modeling and Simulation in Machining Processes
- Information
- Views: 2275 hit(s) Pub. Date: 27 October 2017
AUTHOR(S): Daschievici Luiza, Ghelase Daniela, Ioana Diaconescu -
Special Lubrication Problems for Bearings Running at High Speed
- Information
- Views: 2235 hit(s) Pub. Date: 27 October 2017
AUTHOR(S): Traian Eugen Bolfa -
Study of the Instability due the Different Position of an Aileron
- Information
- Views: 2095 hit(s) Pub. Date: 25 September 2017
AUTHOR(S): Oana Dumitrescu, Bogdan Gherman, Valeriu Drăgan -
Industrial Process Steam-Consumption Prediction through an Artificial Neural Networks (ANNS) Approach
- Information
- Views: 2549 hit(s) Pub. Date: 23 August 2017
AUTHOR(S): Fitsum Bekele Tilahun, Ramchandra Bhandari, Menegesha Mamo -
Cutting Tool Reliability Testing and Data Proceeding
- Information
- Views: 2337 hit(s) Pub. Date: 22 June 2017
AUTHOR(S): Stamate Valentin -
Some Considerations Regarding the Influence of Coal Quality on the Environment
- Information
- Views: 2234 hit(s) Pub. Date: 22 June 2017
AUTHOR(S): Bolfa Traian Eugen -
Studying Fluid Mechanics for Better Understanding Simulation Technologies. A Special Approach for Maritime Universities
- Information
- Views: 2353 hit(s) Pub. Date: 22 June 2017
AUTHOR(S): Dumitru Dinu -
One Application of the ENFR Fracture Test: Coupon Testing for Wind Turbine Blade Materials
- Information
- Views: 2062 hit(s) Pub. Date: 15 May 2017
AUTHOR(S): Ana Boyano, Igor Ansoategui, Unai Fernandez-Gamiz, Ekaitz Zulueta, Jose Manuel Lopez-Guede, Faustino Mujika -
Study On The Turning Process Of High Temperature Nickel‐based Superalloy Inconel 718
- Information
- Views: 1752 hit(s) Pub. Date: 25 April 2017
AUTHOR(S): Mussokulov Nursulton, Dr.Wang Zhenhua -
Progress of Solution Methods Based Boundary Layers of Turbulent Flow
- Information
- Views: 2201 hit(s) Pub. Date: 24 April 2017
AUTHOR(S): Sabah Tamimi -
Discrete Model of Hydraulic Fracture Crack Propagation in Media with Filtration
- Information
- Views: 1918 hit(s) Pub. Date: 24 April 2017
AUTHOR(S): Sergey Kanaun, Daniel Morales -
Investigation of Neural Classifiers for Recognition of Micro Components of Solar Concentrators
- Information
- Views: 1754 hit(s) Pub. Date: 28 March 2017
AUTHOR(S): Tetyana Baydyk, Ernst Kussul, Gengis Kanhg Toledo-Ramirez -
Low-temperature Mechanical Behavior of Reinforced Polyurethane Foam
- Information
- Views: 2098 hit(s) Pub. Date: 22 February 2017
AUTHOR(S): Jeong-Hyeon Kim, Seul-Kee Kim, Sungkyun Park, Kang Hyun Park, Jae-Myung Lee -
Effect of Loading Direction and Temperature on Compressive Behavior of Compressed Laminated Wood in LNG/LPG Tank Supporter
- Information
- Views: 2158 hit(s) Pub. Date: 22 February 2017
AUTHOR(S): Dong-Man Ryu, Jong-Hwan Kim, Jae-Myung Lee -
Characteristics of Heat Transfer of Buoyancy-driven Rectangular Cavity with Various Aspect Ratios
- Information
- Views: 2091 hit(s) Pub. Date: 22 February 2017
AUTHOR(S): Juhee Lee -
Numerical Quantification of Thermal Properties of Insulation Coating
- Information
- Views: 1963 hit(s) Pub. Date: 04 January 2017
AUTHOR(S): Jozef Kacur, Michal Kopcok, Jozefa Lukovicová, Alena Struhárová -
Smart Materials For The Internal Vibro-Acoustic Performance Improvement In Turboprop Aircraft
- Information
- Views: 2024 hit(s) Pub. Date: 14 December 2016
AUTHOR(S): Massimo Viscardi, Maurizio Arena, Giuseppina Barra, Liberata Guadagno -
Testing of Hydraulically Driven Ramming Device
- Information
- Views: 2094 hit(s) Pub. Date: 14 December 2016
AUTHOR(S): Jiri Balla, Zbynek Krist, Cong Ich Le -
Structural Analysis of the Forming Press for Airplane Stringers
- Information
- Views: 2176 hit(s) Pub. Date: 14 December 2016
AUTHOR(S): Chae Yoon Yang, Hyun Ho Kim, Chul Ki Song -
Effect of the Changing of the Feed on Surface Topography at Face Milling
- Information
- Views: 2048 hit(s) Pub. Date: 24 October 2016
AUTHOR(S): Csaba Felho, Janos Kundrak -
A Study of Micro to Nano Structure Fine Solid Line Printing for Graphene Ink by Micro-flexographic Printing Method
- Information
- Views: 2388 hit(s) Pub. Date: 17 October 2016
AUTHOR(S): Suhaimi Hassan, Mohd Sallehuddin Yusof, Mohd Idris Maksud, Muhamad Nor Nodin -
Use of Finite Element Method (FEM) to Determine Spatio-Temporal Evolution of Pollutants in River-Type Systems
- Information
- Views: 2055 hit(s) Pub. Date: 17 October 2016
AUTHOR(S): Galina Marusic, Calin Ciufudean, Diana Marusic -
Thermal Performance Comparison of Ejecting Thermosyphon Heat Pipe with Conventional Thermosyphon Heat Pipe
- Information
- Views: 2037 hit(s) Pub. Date: 22 September 2016
AUTHOR(S): Abdullah Yildiz, Mustafa Ali Ersöz, Kadir Gündogan -
Block Nested Refinement and Numerical Estimation for Sudden Expansion Pipes in Various Step Angles
- Information
- Views: 2136 hit(s) Pub. Date: 22 September 2016
AUTHOR(S): Christina G. Georgantopoulou -
Teenage Cyclist - Pick Up Crash by Multibody Simulation; HIC Evaluation and Comparison with Previous Results
- Information
- Views: 2065 hit(s) Pub. Date: 15 June 2016
AUTHOR(S):Filippo Carollo, Vincenzo Naso, Gabriele Virzi’ Mariotti -
Active Vibration Control of a Mounting Bracket for Automotive Gearboxes
- Information
- Views: 2254 hit(s) Pub. Date: 15 June 2016
AUTHOR(S):D. Magliacano, M. Ciminello, I. Dimino, M. Viscardi, A. Concilio -
Techno-Economic Analysis of Ranque-Hilsch Vortex Tube Aided Hybrid Cooling and Drying System
- Information
- Views: 2408 hit(s) Pub. Date: 15 June 2016
AUTHOR(S):Merve Senturk Acar, Halit Arat, Oguz Arslan -
Analysis of the Operational Reliability of the Rotary Cup Burner of a Marine Boiler
- Information
- Views: 2145 hit(s) Pub. Date: 27 April 2016
AUTHOR(S):Goran Kovacevic, Josko Dvornik, Srdan Dvornik -
Control of Autonomous Underwater Vehicles using Neural Network Based Robust Control System
- Information
- Views: 2162 hit(s) Pub. Date: 22 April 2016
AUTHOR(S): Ikbal Eski, Sahin Yildirim -
A Measurement Practice for Thermal Characteristics of Porous Mediums
- Information
- Views: 1979 hit(s) Pub. Date: 12 April 2016
AUTHOR(S):Melda Ozdinc Carpinlioglu, Ozkan Kirec -
Analysis on Flow Characteristic According to Change of Working Fluid Temperature and Swash Plate Angle in Swash Plate Piston Pump
- Information
- Views: 2082 hit(s) Pub. Date: 12 April 2016
AUTHOR(S):Chung-Ho Lee, Jeong-Se Suh -
Proposed of ITS Specification for BRT
- Information
- Views: 2031 hit(s) Pub. Date: 23 March 2016
AUTHOR(S): Cledson Akio Sakurai, Caio Fernando Fontana, Claudio Luiz Marte, Leopoldo Yoshioka, Antonio Gil Da Silva Andrade -
Measurements of 3D Sound Characterisation in an UNESCO Theatre in Italy
- Information
- Views: 2042 hit(s) Pub. Date: 18 March 2016
AUTHOR(S): Lamberto Tronchin -
Verification of eCall Unit Parameters to Describe the Traffic Accident Seriousness
- Information
- Views: 2003 hit(s) Pub. Date: 18 March 2016
AUTHOR(S): Josef Mik, Jana Kadlecova, Petr Bouchner -
Aggressive and Dangerous Behavior of Car and Motorcycle Drivers in the Czech Republic – Analysis of Floating Cars Records
- Information
- Views: 1958 hit(s) Pub. Date: 18 March 2016
AUTHOR(S): Petr Bouchner, Stanislav Novotny -
Results of Inspections of Risk Management Quality in Facilities of Critical Infrastructure
- Information
- Views: 2089 hit(s) Pub. Date: 17 March 2016
AUTHOR(S): Dana Prochazkova, Jan Prochazka -
On Testing of Vehicle Active Suspension Robust Control on An One-Quarter-Car Test Stand
- Information
- Views: 2283 hit(s) Pub. Date: 29 February 2016
AUTHOR(S): Katerina Hyniova