FPGA Based Implementation of Distributed Minority and Majority Voting Based Redundancy for Mission and Safety-Critical Applications

AUTHOR(S):

P. Balasubramanian, Nikos Mastorakis

TITLE

FPGA Based Implementation of Distributed Minority and Majority
Voting Based Redundancy for Mission and Safety-Critical Applications

PDF

KEYWORDS

Mission-critical, Safety-critical, Redundancy, Reliability, Fault tolerance, FPGA, Digital circuits

ABSTRACT

Electronic circuits and systems used in mission and safety-critical applications usually employ redundancy in the design to overcome arbitrary fault(s) or failure(s) and guarantee the correct operation. In this context, the distributed minority and majority voting based redundancy (DMMR) scheme forms an efficient
alternative to the conventional N-modular redundancy (NMR) scheme for implementing mission and safetycritical circuits and systems by significantly minimizing their weight and design cost and also their design metrics whilst providing a similar degree of fault tolerance. This article presents the first FPGAs based implementation of example DMMR circuits and compares it with counterpart NMR circuits on the basis of area occupancy and
critical path delay viz. area-delay product (ADP). The example DMMR circuits and counterpart NMR circuits are able to accommodate the faulty or failure states of 2, 3 and 4 function modules. For physical synthesis, two commercial Xilinx FPGAs viz. Spartan 3E and Virtex 5 corresponding to 90nm and 65nm CMOS processes, and two radiation-tolerant and military grade Xilinx FPGAs viz. QPro Virtex 2 and QPro Virtex E corresponding to
150nm and 180nm CMOS processes were considered for the NMR and DMMR circuit realizations which employ the 4×4 array multiplier as a representative function module. To achieve a fault tolerance of 2 function modules, both the DMMR and the NMR schemes provide near similar mean ADPs across all the four FPGAs. But while achieving a fault tolerance of 3 function modules the DMMR features reduced ADP by 44.5% on average compared to the NMR, and in achieving a fault tolerance of 4 function modules the DMMR reports reduced ADP by 56.5% on average compared to the NMR with respect to all the four FPGAs considered.

Cite this paper

P. Balasubramanian, Nikos Mastorakis. (2016) FPGA Based Implementation of Distributed Minority and Majority Voting Based Redundancy for Mission and Safety-Critical Applications. International Journal of Circuits and Electronics, 1, 185-190