oalogo2  

AUTHOR(S):

Badea Lepadatescu, Flavia Fechete

 

TITLE

Study Regarding a Theoretical Model of the Machining by Grinding in the Presence of the Cutting Fluid

pdf PDF

ABSTRACT

In the paper is presented a theoretical model of the machining by grinding in the presence of the cutting fluid. First is presented the single grain model in the case of grinding in dry condition of work and after that is presented single grain model, in the presence of cutting fluid. It was established the role of the cutting fluid in the grinding process that quickly evacuate the heat from the cutting area and to quickly remove the formed chips and to form a separating layer between the abrasive grain and part, reducing friction and the amount of heat detached. The mathematical modeling of the roughness of the surfaces processed by grinding based on the spherical model it is considered a rather complex problem where we want to understand the action of the parameters with major influence on the quality of the workpieces. These parameters are: technological parameters, construction parameters and the cutting fluid.

KEYWORDS

grinding process, mathematical model, surface finish, cutting fluid

 

Cite this paper

Badea Lepadatescu, Flavia Fechete. (2022) Study Regarding a Theoretical Model of the Machining by Grinding in the Presence of the Cutting Fluid. International Journal of Instrumentation and Measurement, 7, 5-12

 

cc.png
Copyright © 2022 Author(s) retain the copyright of this article.
This article is published under the terms of the Creative Commons Attribution License 4.0