|
AUTHOR(S): Samba Aime Herve , Houwe Alphonse, Yeremou Tamtsia Aurelien
|
TITLE |
 PDF |
ABSTRACT In this work, the implementation, simulation and analysis of PID algorithms have been carried out; applied in a DC motor with brushes by means of a control system in a wireless network, where the network is part of the closed control loop, using the protocol Message Queuing Telemetry Transport (MQTT) for communication between the broker and the plant. The performance of each of the control algorithm was evaluated through simulations in the network, which allowed determining the dynamic response parameters of the system. With the data obtained, the algorithms were implemented using a development tool based on the flow for visual programming, with the purpose of controlling and monitoring wirelessly or even through a mobile device remotely in real time, thus becoming an IoT application. Optimum performance is corroborated through communication and control tests when the plant is subjected to disturbances. |
KEYWORDS Protocol Message Queuing Telemetry Transport (MQTT), PID control algorithm, IoT application, Wireless |
|
Cite this paper Samba Aime Herve , Houwe Alphonse, Yeremou Tamtsia Aurelien. (2022) Design and Implementation of Wireless Networked PID Control Algorithm Using MQTT Device Simulator for IoT Systems. International Journal of Computers, 7, 27-30 |
|
