oalogo2  

AUTHOR(S):

Indhika Fauzan Warsito, Hafild Widyaputera, Eko Supriyanto, Muhammad Akmal Abu Taib, Muhammad Faudzi M. Yasir

 

TITLE

Simulation and Analysis of Electromagnetic Interference Effects with 900 MHz Frequency on Various EMI Protection Model

pdf PDF

ABSTRACT

Electromagnetic interference possesses potential hazard towards equipment in an oil and gas refinery plant. Installing mesh common bonding network with high conductor density underneath the equipment is known to be an effective protection method against this thread. Nevertheless, using more conductor would require higher cost. Henceforth, a series of simulations has been executed to determine the optimum mesh configuration. The modelling and simulations were carried by using COMSOL software. In the simulations, the mesh diagonal (D) were varied from 6.9mm to 70.5mm. The results show that the electromagnetic interference was less for mesh with smaller D. However, the total cost rose exponentially when D was decreased to a certain value. All but all, this study found that mesh configuration with D 14mm is the most optimum option.

KEYWORDS

Electromagnetic interference, individual mesh diagonal, mesh common bonding network

 

Cite this paper

Indhika Fauzan Warsito, Hafild Widyaputera, Eko Supriyanto, Muhammad Akmal Abu Taib, Muhammad Faudzi M. Yasir. (2019) Simulation and Analysis of Electromagnetic Interference Effects with 900 MHz Frequency on Various EMI Protection Model. Journal of Electromagnetics, 4, 1-6

 

cc.png
Copyright © 2018 Author(s) retain the copyright of this article.
This article is published under the terms of the Creative Commons Attribution License 4.0