oalogo2  

AUTHOR(S):

A.T. Boum, D. Bingong, J.P. Corriou

 

TITLE

Nonlinear quadratic dynamic matrix control of a fluidized catalytic cracking unit

pdf PDF

 

ABSTRACT

This paper present the application of a nonlinear model predictive control strategy to an fluidized catalytic cracking (FCC) unit. The FCC is a complex nonlinear process that has been the subject of many models and control studies. The present dynamic model of the FCC process, inspired from Blacken model, uses three lump kinetics to describe the cracking reactions in the riser considered as a plug-flow system. The riser behaviour is described by gasoil, gasoline, coke and energy balances. The separator is considered as a CSTR. The regenerator mainly constituted by a dense and a dilute zone is also considered as a CSTR to represent the catalyst and its dynamic behaviour is described by coke, oxygen and energy balances. This model is sufficiently complex to capture the major dynamic effects that occur in an FCC and to control the key variables that are the riser outlet temperature and the regenerator dense bed temperature. The manipulated inputs are the air inlet flow rate in the regenerator and the regenerated catalyst flow rate. Hard constraints are imposed with respect to the manipulated variables. In spite of the important nonlinearity of the FCC, Nonlinear quadratic dynamic matrix control is able to maintain a smooth multivariable control of the plant, while taking into account the constraints. The comparison study with linear quadratic dynamic matrix control shows a better following of the set point.

 

KEYWORDS

Nonlinear, Predictive control, fluid catalyst

 

REFERENCES

[1] Ali, H., Rohani, S., and Corriou, J. (1997). Modelling and control of a riser type fluid catalytic cracking (FCC) unit. Trans. IChemE., 75, part A, 401–412.

[2] Balchen, J., Ljungquist, D., and Strand, S. (1992). State- space predictive control. Chem. Eng. Sci., 47(4), 787–807.

[3] Boum, A.T., Latifi, A., and Corriou, J.P. (2013). Model predictive control of a fluid catalytic cracking unit. In Process Control (PC), 2013 International Conference on, Fig. 11. Temperature at the top the riser with qdmc y1 (K) Fig. 16. Flow rate of air with nlqdmc u2 (kg.s-1) Fig. 17. Flow rate of air with qdmc u2 (kg.s-1) Fig. 15. Flow rate of regenerated catalyst with qdmc u1 (kg.s-1) Fig. 10. Temperature at the top of the riser with nlqdmc y1 (K) Fig. 12. Temperature at the top of the riser with nlqdmc y2 (K) Fig. 13. Temperature at the top of the riser with qdmc y2 (K) Fig. 14. Flow rate of regenerated catalyst with nlqdmc u1 (kg.s-1) 335–340. doi:10.1109/PC.2013.6581433.

[4] Boum, A.T., Latifi, M., and Corriou, J. (2015). Multivariable control and online state estimation of an FCC unit. Journal of Engineering Science and Technology Review, 8(3), 158-168.

[5] Corma and Martinez-Triguero (1994). Kinetics of gas oil cracking and catalyst decay on SAPO-7 and USY molecular sieves. App Catal, 118, 153-162.

[6] Corriou, J. (2003). Commande des procédés. Lavoisier, Tec. & Doc., Paris.

[7] Errazu, A., de Lasa, H., and Sarti, F. (1979). A fluidized bed catalytic cracking regenerator model grid effects. Can. J. Chem. Engng., 57, 191-197.

[8] Hovd, M. and Skogestad, S. (1991). Controllability analysis for the fluid catalytic cracking process. AIChE Annual Meeting.

[9] Hovd, M. and Skogestad, S. (1993). Procedure of regulatory control structure selection with application to the FCC process. AIChE J., 39(12), 1938-1953.

[10] Kurihara, H. (1967). Optimal Control of Fluid Catalytic Cracking Process. Ph.D. thesis, MIT.

[11] Lee, E. and Groves, F. (1985). Mathematical model of the fluidized bed catalytic cracking plant. Trans. Soc. Comput. Sim., 2, 219-236.

[12] Moro, L.L. and Odloak, D. (1995a). Constrained multivariable control of fluid catalytic cracking converter. Journal of Process Control, 5, 29-39.

[13] Moro, L.L. and Odloak, D. (1995b). Constrained multivariable control of fluid catalytic cracking converters. Journal of Process Control, 5, 29-39.

[14] Schittkowski, K. (1985). NLPQL: A Fortran subroutine solving constrained nonlinear programming problems. Ann. Oper. Res., 5, 485-500.

[15] Shridar, R. and Cooper, D. (1998). A novel tuning strategy for multivariable model predictive control. ISA Transactions, 36(4), 273-280.

[16] Weekman, V. and Nace, D. (1970). Kinetics of catalytic cracking selectivity in fixed, moving and fluid bed reactors. AIChE J., 16(3), 397-404.

Cite this paper

A.T. Boum, D. Bingong, J.P. Corriou. (2017) Nonlinear quadratic dynamic matrix control of a fluidized catalytic cracking unit. International Journal of Control Systems and Robotics, 2, 141-148

 

cc.png
Copyright © 2017 Author(s) retain the copyright of this article.
This article is published under the terms of the Creative Commons Attribution License 4.0