oalogo2  

AUTHOR(S):

Younes El Khchine, Mohammed Sriti

 

TITLE

Boundary layer and mesh refinement effects on aerodynamic performances of horizontal axis wind turbine (HAWT)

pdf PDF

 

ABSTRACT

The design of rotor blades has a great effect on the aerodynamics performances of horizontal axis wind turbine and its efficiency. This work present the effects of mesh refinement and boundary layer on aerodynamics performances of wind turbine S809 rotor. Furthermore, the simulation of fluid flow is taken for S809 airfoil wind turbine blade using ANSYS/FLUENT software. The problem is solved by the conservation of mass and momentum equations for unsteady and incompressible flow using advanced SST k-ω turbulence model, in order to predict the effects of mesh refinement and boundary layer on aerodynamics performances. Lift and drag coefficients are the most important parameters in studying the wind turbine performance, these coefficients are calculated for four meshes refinement and different angles of attacks with Reynolds number is 106. The study is applied to a S809 blade airfoil 21% thick, specially designed by NREL for horizontal axis wind turbines.

 

KEYWORDS

Aerodynamic performances, S809 airfoil, CFD Simulation, SST k-ω turbulence model, Boundary layer.

 

REFERENCES

[1] Swanson, R.C. ; Langer, S, Steady-state laminar flow solutions for NACA 0012 airfoil, Computers and Fluids, 126, 2016, 102-128

[2] Zhou, L.; Yunjun, Y.; Anlong, G. and Weijiang, Z, Unstructured adaptive grid refinement for flow feature capture, 2014 Asia-Pacific International Symposium on Aerospace Technology, 99, 2015, 477-483

[3] Bekhti, A.; Guerri, O, Influence de la rugosité sur les caractéristiques aérodynamiques d’un profil de pale d'éolienne, Revue des Energies Renouvelables, 15(2), 2012, 235 – 247

[4] Moshfeghi, M.; Song, Y.J. and Xie, Y.H, Effects of near-wall grid spacing on SST k-ω model using NREL Phase VI horizontal axis wind turbine, Journal of Wind Engineering and Industrial Aerodynamics, 107-108, 2012, 94-105

[5] Genç, M.S.; Karasu, I. and Açıkel, H.H, An experimental study on aerodynamics of NACA2415 aerofoil at low Re numbers, Experimental Thermal and Fluid Science, 39, 2012, 252–264

[6] Kapsalis, P.C.S.; Voutsinas, S. and Vlachos, N.S, Comparing the effect of three transition models on the CFD predictions of a NACA0012 airfoil aerodynamics, Journal of Wind Engineering and Industrial Aerodynamics, 157, 2016, 158–170

[7] Guerri, O.; Bouhadef, K. and Harhad, A, Turbulent Flow Simulation of the NREL S809 Airfoil, Wind engineering, 30(4), 2006, 287-302

[8] Eleni, D.C.; Athanasios, T.I. and Dionissios, M.P, Evaluation of the turbulence models for the simulation of the flow over a National Advisory Committee for Aeronautics (NACA) 0012 airfoil, Journal of Mechanical Engineering Research, 4, 2012, 100-111

[9] Bai, C.J.; Hsiao, F.B.; Li, M.H.; Huang, G.Y. and Chen, Y.G., Design of 10 kW Horizontal-Axis Wind Turbine (HAWT) Blade and Aerodynamic Investigation Using Numerical Simulation, 7th Asian-Pacific Conference on Aerospace Technology and Science, 67, 2013, 279-287

[10] Song, Y.; Perot, J.B, CFD Simulation of the NREL Phase VI Rotor, Wind engineering, 39(3), 2015, 299-310

[11] Sayed, M.A.; Kandil, H.A. and A. Shaltot, Aerodynamic analysis of different wind-turbine-blade profiles using finite-volume method, Energy Conversion and Management, 64, 2012, 541-550

[12] Menter, F.R, Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications, AIAA Journal, 32 (8), 1994, 1598-1605

[13] Wilcox, D.C, Formulation of the k-omega Turbulence Model Revisited, AIAA Journal, 46 (11), 2008, 2823-2838

Cite this paper

Younes El Khchine, Mohammed Sriti. (2017) Boundary layer and mesh refinement effects on aerodynamic performances of horizontal axis wind turbine (HAWT). International Journal of Mechanical Engineering, 2, 119-125

 

cc.png
Copyright © 2017 Author(s) retain the copyright of this article.
This article is published under the terms of the Creative Commons Attribution License 4.0